FWBU2DSATA14 is eSATA, FireWire800 (IEEE 1394b) & USB 2.0 ComBo to Single SATA Bridge Board featuring Oxford OXUF934DSB. FWBU2DSATA14 is configured in eSATA/FireWire800 (IEEE 1394b)/USB 2.0 triple-interface mode for connecting one SATA data storage device, e.g. hard disk drives, CD-ROM, CD-R, CD-RW and DVD. No additional USB/1394 host drivers are required, for either Windows or Mac operating systems. Firmware can be programmed through the FireWire or USB ports, simplifying in-field updates. By using an external SATA port multiplier, a two-disk RAID 0 configuration is possible
|
- DC Power Connector: Mini 4-pin Floppy Disk Drive like power connector.
- USB 2.0 Port: One USB B-Type connector
- USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
- USB Bus Power: Self Powered Mode Operation
- FireWire Port: Two Bilingual (IEEE 1394b) Connectors
- 1394b PHY: Ti's TSB81BA3D
- 1394 Bus Transfer Rate: 100/200/400/800 Mbps
- eSATA port: One eSATA Singal 7pin Connector
- SATA Transfer Rate: 300Mbytes/s
- SATA Drive Port: One SATA Signal 7pin Latch Type Connector
- Supports storage with more than 2 TB per Volume
- Provide pin header for Power indicator LED and SATA Access LED
- SCSI I 50pin Low Density Centronics Connector Form Factor
(Fit to most standard SCSI enclosure) - 9.12cm (W) x 2.16cm (H) x 6.15cm(D)
- Windows ME/2000/XP/2003/Vista; Mac OS 9.1 or higher; Linux
- Driver Requirements
- USB:
- No driver installation for Windows ME, 2000, XP, 2003, Vista, Mac OS and Linux.
- FireWire:
- No driver installation for Windows ME, 2000, XP, 2003, Vista, Mac OS and Linux.
- USB:
 |
IOI Technology Corporation |
OEM/ODM Welcome
and DISTRIBUTORS Wanted |
|
Email:
sales@ioi.com.tw |
|
MORE INFORMATION AVAILABLE AT FWBU2DSATA14