| 
Mirror Drive is a selectable hardware
RAID enclosure for two 3.5" SATA HDD. A true hardware solution,
Mirror Drive requires no software to be installed
on your machine.
It provides 4 hardware RAID mode:
- RAID 1 (Mirroring): for two disks with same capacity.
- RAID 0 (Striping): for two disks with same capacity.
- Spanning: for two disks with different capacity.
- Non-RAID (JBOD)
RAID 1 (Mirroring):
By mirroring technique, Mirror Drive maintains data
in two disk drives simultaneously and securely. If one drive fails,
Mirror Drive automatically switches operations to
the functional drive and alert the failure. Once a new HDD is installed
to replace the defective drive, the Mirror Drive
will automatic rebuild the entire HDD image in the background, while
providing the un-interrupt data connection to the system
RAID 0 (Striping) and Spanning:
By striping/ spanning technique, Mirror Drive integrates
two HDDs into a big drive.
Mirror Drive provides the cost-effective
solution for data backup.
- Provides two mobile tray for 3.5" SATA HDD
- SATA HDD direct connect to SATA cable (no converting
P.C.B required)
- Support both SATA (1.5 Gbit/sec) and SATA II (3.0
Gbit/sec)
- Provides Keylock
- One 40x40 mm cooling fan
- Error indicator LED and HDD Access LED for
each SATA drive
 
- Provides RAID setting switch in the rear panel
- Provide 4 hardware RAID mode:
- Raid 0 (Stripping)
- Raid 1 (mirroring)
- Span (big drive)
- JBOD
- Auto-Rebuilding function enables you to backup
the hard disk off-line. (RAID 1)
- Support On-Line Auto-Rebuilding (RAID 1)
- No HDD size limitation
- Windows ME/2000/XP/2003; MacOS 9.1 or higher; Linux
MAC
1. FWBU2SATA35DMR : USB 2.0 & FireWire800
(IEEE 1394b) interface
2. UF2SATA35DMR : USB 2.0 & FireWire (IEEE
1394a) interface
3. U2SATA35DMR : USB 2.0 interface
- Mirror Drive Enclosure.
- Screws for two 3.5" HDD
- User's Manual
- A-to-B type USB 2.0 Cable 1.5m length.
- 6pin-to-6pin FireWire Cable 1.5m length. - Only
for UF2SATA35DMR
- Beta 9pin -to- Beta 9pin Cable 1.5m length. -Only
for FWBU2SATA35DMR
- AC power cord 6 feet length.
- AC 100 ~ 240 V to DC +12V/ 4.16A Power Adapter.
- Input: Changeable AC power cord
- Auto-switching
- Input: 100~240Vac, 50~60Hz, 1.7A (Max)
- Output: +12Vdc, 4.16A (Max)
- Output: Standard Walkman-type 2.1 mm DC power
plug
|
