| 
VID (U2ATA18B01) is an USB 2.0 to ATA
Enclosure for HITACHI 1.8" HDD. This newly designed product uses
the most advanced NEC uPD720133 USB 2.0 to ATA bridge controller.
Its unique security feature (access to drive with password) provides
protection to your data in the HDD. In addition, the good power control
design provides long-lasting life cycle for the HDD.
VID (U2ATA18B01) is the perfect solution for data backup and transferring
of data between computers!
- Anodized Aluminum Design
- Two colors ( silver & black ) for choice
- USB 2.0 :
- Supports bus-power
- Connector Type: Standard mini B Type
- Indicator LED :
Equipped with USB Power Indicator LED and HDD Power & Access
Indicator LED
- Green:
| On |
HDD Power On |
| Blinking |
HDD Access |
- Red:
| Off |
Suspended, Disconnected, Disabled,
or Not Configured |
| On |
USB Power On |
- Support HITACHI 1.8" ATA HDD
- Bootability
- Enable uPD720133 in returning Flexible Disk
Mode Page when receiving Mode Sense command from the host
PC.
- Standby Immediate
- Transition to low power state by Standby immediate
command.
- EnergyStar (No Power Switch Needed) :
- The power of 1.8" HDD will be removed
when computer
enters "Sleep" or "Standby" state
- Resume the computer will bring 1.8" ATA
HDD to
power-on condition automatically
- Dismounting "USB Mass Storage Device"
will turn off
the power of the 1.8" ATA HDD automatically
- Shut down the computer will turn off the power
of the
1.8" ATA HDD automatically
- Security --- Control of access to drive with password.
By using SCSI Through ATA (Vendor specific SCSI command) to issue
the ATA command for HDD security.
- One-Button Backup
- Press the button for 1 second will trigger
data backup
- Auto backup your data
- Easy recovery your data
- VID Enclosure
- Bridge Board
- Real Panel
- A-to-mini B type USB 2.0 Cable 1.5m length.
- Screws
- Installation Guide
- Protection Bag
- CD-title (Driver for Windows98/98SE, Backup software)
|
