• 1-to-5 SATA Port Multiplier
  • OS independent
  • Supports RAID levels: 0 / 1 / 3 / 5 / 10 / JBOD / Clone
  • Supports Hot Spare on RAID
  • Enclosure Management (Temperature Management and Fan Control)
  • With LCD Module and Setup Buttons to Simplify the RAID setup and management

SPM394 is one to Five SATA Port Multiplier RAID Controller with LCD Module. It is designed to provide SATA port expansion, data protection and performance aggregation at various applications.

SPM394 uses market-proven Multi-port Serial ATA PHY technology and proprietary storage processor to provide very high efficient SATA RAID operation. With an easy configuration scheme, the device can be a pure port multiplier which provides SATA port expansion just like a SATA Hub, or hard-drive performance booster which provides a high performance device seen by host controller or hard-drive data protector which automatically backup data to prevent data loss from hard-drive damage. SPM394 also has advance mode to provide both benefit of performance boost and data protection.

SPM394 is a self-contained storage processor chip which completely frees up the main CPU loading and the SATA ports comply with eSATA specification, making it suitable for use in both internal system and external storage applications.

 

Connectors
1. Five SATA Device Ports
2. One SATA Host Port
3. Mini 4-pin FDD like power Connector

Status LEDs
4. Device Status (Error, Activity/Link)
5. Power/RAID/Host Status

LCD Screen
6. Monitor

Buttons
7. Up, Down, ESC, Enter

SATA Feature
  • Supports 6-port 3.0Gbps SATA II interface
  • Supports SATA II Gen2i and Gen2m (External SATA Connection, eSATA)
  • Output swing control and automatic impedance calibration for SATA II PHY
  • Supports asynchronous signal recovery
  • Supports spread spectrum clocking
  • Supports partial / slumber power saving mode
  • Automatically speed negotiation for 3 Gbps or 1.5 Gbps
  • Supports BIST and loopback mode
  • Supports staggered spin-up
  • Supports 48-bit LBA addressing
  • Supports Native Command Queue (NCQ)
  • Supports Hot-Plug
  • Supports Asynchronous Notification
  • Supports PM aware and non-PM aware host
RAID Feature
  • Fully hardware-accelerated RAID Engine
  • No driver, BIOS or software required for RAID operation
  • No external DRAM or processor required for RAID operation
  • Independent of device SATA port connection sequence
  • Supports RAID levels: 0 / 1 / 3 / 5 / 10 / JBOD / CLONE
  • RAID 3 / 5 write-back cache to enhance performance
  • SATA In-band application interface
  • Supports more than 2Tera Bytes RAID drive
  • Supports on-line read data integrity check
  • Supports on-line command based bad sector recovery
  • Supports on-line Auto-Rebuild
  • Rebuild speed: 200GB/hour
  • Rebuild proceed continuously between power cycling
  • Supports Hot Spare on RAID
  • Supports various RAID configuration and monitoring method
Compliance
  • Compliant with Serial ATA II Port Multiplier Spec. Revision 1.1
  • Compliant with Serial ATA II PHY Electrical Spec. Revision 1.0
  • Compliant with Serial ATA High Speed Serialized AT Attachment Spec. Revision 2.5

LCD Module
  • Simplifies the RAID setup and management of the associated disk drives
  • Allows manual RAID configuration and status monitoring
  • Uses hardware monitor to monitor system voltage, temperature and fan activity
  • Displays warning message on LCD screen when respective disk encounters problems.
DC Power Connector Mini 4-pin Floppy Disk Drive like power Connector
LEDs
  • Power Status LED
  • RAID Status LED
  • Host Status LED
  • Device Status LEDs (Error, Activity/Link)
Button
  • RAID Setting Buttons

  • 5.25” ODD (Optical Disk Drive) form factor
  • 146.6mm(W) x 42mm(H) x 65mm(D)
 IOI Technology Corporation
Product Websites:
www.ioi.com.tw | www.ioi1394.com | www.ioisata.com | www.ioisas.com | www.ioiusb.com
OEM/ODM Welcome and DISTRIBUTORS Wanted
Email: sales@ioi.com.tw

MORE INFORMATION AVAILABLE AT SPM394

If you can't see this information, please link it. thanks