Fan and Temperature fail detector
- Provides a fan detector and temperature detector
and buzzer driver circuit.
- Provides alarm disable Button/Switch.
Fan Connector
Buzzer
 |
When the System or HDDs failed,
it will make a sound of warning. |
There are three ways to Enable/ Disable the
buzzer.
1. Buzzer Control Switch.
2. Buzzer Control Button.
3. EagleEye RAID Manager Utility.
Buzzer Control Switch
|
|
Switch 1ON: Enable |
Switch 1 OFF: Disable |
Buzzer Control Button
|
 |
Switch
1 "OFF" and connect to Buzzer Button |
|
|
Button ON: Enable |
Button OFF: Disable |
Enable/ Disable the buzzer through
the EagleEye RAID Manager Utility
To switch the RAID system Buzzer .
LCD Message for Fan and Temperature fail
detector
EagleEye RAID Manager information
"Hardware Monitor"
setting of EagleEye RAID Manager
 |
Hardware monitor setting |
"Smart Fan Control" setting
of EagleEye RAID Manager
 |
Smart Fan control-
You can set Temperature and Fan speed . |
On RAID System 1, failed message
