Error Notification

E-mail Setting

If you enabled e-mail notify function and local connected RAID system occurring hard disk fail or system fail, it will auto send e-mail.

Use program setup e-mail notifies when hard disk fail or system fail. You can select whether or not send e-mail when fail occurring. Edit the e-mail Subject and Contents by yourself. And program will auto add fail information in front of e-mail content.

• The computer must install TCP/IP network component.
  • Check Box: Select whether or not enable e-mail notifies function. If checked which is enable. Otherwise is disable.
  • Port: E-mail Host port. Example: 25
  • E-Mail Host: E-mail Host name
  • Login User Name : User Login Internet / Intranet User Name.
  • Name: User E-mail name.
  • E-Mail Address: User e-mail Address.
  • Time Out: Setup wait time when try connecting to e-mail Host.



• Hard Disk Fail message setting
  • E-Mail Address: Edit receivers e-mail address. (Use mouse right button to copy, paste and delete data ).
  • Add: Addition a new receiver e-mail address to above address table.
  • E-Mail Subject: Edit send e-mail subject.
  • E-Mail Content: Edit send e-mail content.



• System Fail message setting (Temperture and Fan failed)
  • E-Mail Address: Edit receivers e-mail address. (Use mouse right button to copy, paste and delete data ).
  • Add: Addition a new receiver e-mail address to above address table.
  • E-Mail Subject: Edit send e-mail subject.
  • E-Mail Content: Edit send e-mail content.

 

Alarm setting ( speaker and sound )

When HDD or system has the mistake, the EagleEye RAID Manager can make a sound of warning.

Use program setups PC speaker alarms or play wav or midi file when RAID system occurring hard disk fail or system fail. If you want to play wav or midi file, the PC must install sound effect card beforehand. You can setup different tone frequency or sound corresponds to different error message which easy to recognize. The alarm function only support local connected RAID system.

• Use Tone Alarm
  • The Tone field selected High(Middle or Low) .
  • Setup Length and Interval value.
  • Setup Interval value.
  • When RAID system occurring correspond to Error Message. (1st-HDD Fail, 2nd-HDD Fail and System Fail).



• Use Sound Alarm
  • The Tone field selected correct wav, midi file.
  • Setup Interval value.
  • When RAID system occurring correspond to Error Message. (1st-HDD Fail, 2nd-HDD Fail and System Fail).

MORE INFORMATION AVAILABLE AT ATA2ATAR01