U2DSATA01 RAID Kit is a cost-effective Serial ATA to USB Bridge RAID kit.

It provides 4 hardware RAID mode:

• RAID 1 (Mirroring): for two disks with same capacity.
• RAID 0 (Striping): for two disks with same capacity.
• Spanning: for two disks with different capacity.
• Non-RAID (JBOD).

RAID 1 (Mirroring):
By mirroring technique, U2DSATA01 maintains data in two disk drives simultaneously and securely. If one drive fails, U2DSATA01automatically switches operations to the functional drive and alert the failure. Once a new HDD is installed to replace the defective drive, the U2DSATA01 will automatic rebuild the entire HDD image in the background, while providing the un-interrupt data connection to the system

RAID 0 (Striping) and Spanning:
By striping/ spanning technique, U2DSATA01 integrates two HDDs into a big drive.

USB 2.0 to dual SATA RAID Bridge Board:

• DC Power Connector: Mini 4-pin Floppy Disk Drive like power connector.
• USB 2.0 Port: One USB B-Type connector
• USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
• USB Bus Power: Self Powered Mode Operation
• SATA Port: Two SATA Signal 7pin Latch Connectors
• SATA Transfer Rate: 150Mbytes/s
• RAID
  • RAID 0 (Striping) for two disks.
  • Disk Spanning for two disks.
• Provide pin header for Power indicator LED and SATA status (Access & Error) LEDs
• There are two model for option.
  • U2DSATA01P
    With PCI Form Factor Bracket
    (Fit to most standard PC Case)
  • U2DSATA01
    With SCSI I 50pin Low Density Centronics Connector Form Factor Bracket
    (Fit to most standard SCSI enclosure)

SATA Mobile Rack:

SATAMR01

• Frame is designed to fit the standard dimension of 5.25" device bay of a computer case.
• Inner HDD tray provide the screw hole for 3.5" SATA HDD.
• Direct connect to Serial ATA cable (no converting P.C.B required)
• Support both SATA 1(1.5 Gbit/sec) and SATA 2(3.0 Gbit/sec)
• Keylock + power switch make SATA HDD hot swappable
• One Built-in 40x40 mm cooling fan
• Power indicator LED and HDD Status (Error and Access) dual color (Red & Green) LED

• Windows ME/2000/XP/2003/7; MacOS 9.1 or higher; Linux
• Driver Requirements
  • USB:
    • No driver installation for Windows ME, 2000, XP, 2003, Vista, 7Mac OS and Linux.
  • FireWire:
    • No driver installation for Windows ME, 2000, XP, 2003, 7, Mac OS and Linux

U2DSATA01P RAID Kit

• U2DSATA01P bridge board.
• Two SATAMR01 SATA Mobile Rack
• CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
  one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
• CB-00136--- USB 2.0 A to B Type Cable with Ferrite Core in length of 1.5m
• User's Manual

  U2DSATA01S RAID Kit

• U2DSATA01 bridge board.
• Two SATAMR01 SATA Mobile Rack
• CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
  one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
• CB-00136--- USB 2.0 A to B Type Cable with Ferrite Core in length of 1.5m
• User's Manual