Introduction

FWBATA35-1 is FireWire 800 (1394b) ComBo to ATA external enclosure designed to enable hot-swap, plug-and-play operation for 3.5 inch ATA HDD through the FireWire 800 (1394b) connection interface installed on a computer. FWBATA35-1 allows users to easily hot-swap ATA hard disk drive without interrupting an concurring operation.

FWBATA35-1 provides the perfect solution for data backup and transferring of data between computers using hard disk drives.

Features
  • Aluminum Enclosure Design: good heat dissipation
  • Easy installation
  • Support standard 3.5 inch HDD
  • FireWire 800 (1394b) interface
  • Provide 3 kinds of Foot Stand (Transparency, Blue and Pink)
  • Provide 3 kinds of Front Panel (Transparency, Blue and Pink)
  • Provide coil cable lock (3-Digits Number) for Security
Technical Specifications

FWBATA35-1 combines three key components:
1). FireWire 800 (1394b) to ATA Bridge Board:
2). Mechanism
3). AC 100 ~ 240 V to DC +12V 3A Power Adapter.

1). FireWire 800 (1394b) to ATA Bridge Board:

  • DC Power Connector: Walkman-type 2.0 mm DC Jack
  • ATA Interface: Male IDC 2X20 Connector
  • Number of 1394b ports: External X 2 (Bilingual-9pin)
  • 1394b PHY: Ti TSB81BA3
  • 1394 Bus Transfer Rate: 100/200/400/800 Mbps
  • Complies with T13's ATA/ATAPI-6 Draft Specification:
    • PIO Mode 0 ~ 4
    • DMA Mode 0 ~ 2
    • Ultra DMA Mode 0 ~ 6
  • Supports 48-bit LBA for large hard drives (>128GB).

2). Mechanism:

  • Aluminum made housing
  • Mobile rack like design
    • The housing is designed to provide sliding guide in the inner side
    • The inner metal mounting bracket provide the screw hole for 3.5" ATA HDD.
    • Design to install the ATA HDD outside the housing
  • Changeable Front Panel
    • Provide 3 color (Transparency, Blue and Pink color) Front Panel
  • Provide Foot Stand to hold U2FWEIDE35-3 stand still
    • Provide 3 color (Transparency, Blue and Pink color) Foot Stand
  • Provide Lock Ring for coil cable lock
  • Provide Power indicator LED (Red color) on the front panel
  • Provide ATA Access indicator LED (Blue color) on the front panel
  • Power Switch on the rear panel.
Hardware Requirements
  • Desktop PC (1): with either a built-in FireWire (1394) controller or a FireWire (1394) to PCI Host Adapter equipped with a external FireWire (1394) port.
  • Laptop PC: with either a built-in FireWire (1394) controller or a FireWire (1394) to CardBus PC Card equipped with a external FireWire (1394) port.
Operating System Requirements
  • Windows 98SE/ME/2000/XP/7; MacOS X or higher
Kit includes
  • FWBATA35-1 Enclosure
  • Beta 9pin -to- 9pin Cable (1.0m length)
  • AC 100 ~ 240 V to DC +12V 3A Power Adapter
  • Screws for 3.5" HDD
  • T-shape Screw Driver
  • 3 color (Transparency, Blue and Pink color) Front Panel
  • 3 color (Transparency, Blue and Pink color) Foot Stand
  • Coiling Cable Lock (3-Digits Number)
  • CD-title (Win98 Drivers and Installation Guide)
  • User's Manual
  • Protection Bag