Highlights
  • 1U 19-inch rack mount chassis
  • Provides four hot-swappable mobile trays for 3.5" SATA HDDs
  • Provides status (Link&Activity, Error) LEDs for each SATA HDD
  • Built-in 220W AC (115-230 VAC/50-60Hz)  to DC Switching Power Supply
  • Supports USB Super-Speed/High-Speed/Full-Speed and eSATA 3Gb/s
  • Supports RAID levels: 0 / 1 / 3 / 5 / 10 / JBOD / Clone
  • Provides RAID Manager GUI Utility to configure and monitor the status of the disks connected on RAID controller
  • Supports Hot Spare on RAID
  • Supports more than 2TB RAID drive
  • Supports on-line Auto-Rebuild
  • Rebuild speed: 200GB/hour
Introduction

1U35Q-UFSQS201 is a eSATA, USB 2.0 & FireWire 800 to Quad SATA RAID II Storage Enclosure.
It provides four hot-swappable 3.5" HDD mobile trays for easy installation and un-installation.
It is eSATA, USB 2.0 & FireWire 800 interface to quad-SATA bridge device with integrated hardware RAID controller, which supports a range of RAID levels and storage applications targeted at users requiring maximum performance, reliability and ease of use.
It provides the perfect solution for data backup and transferring of data between computers using either eSATA or USB 3.0 host ports.
The RAID 5 storage policy allows one HDD failure without impact on the existing data and failed drive rebuild is transparent to the host.
Technical Specifications
Front Panel
Max. HDD Bay / Type
  • Four 3.5" SATA 1(1.5 Gbit/sec) or SATA 2(3.0 Gbit/sec) HDDs
  • Supports more than 2TB HDDs
Mobile Tray
  • Supports 3.5" SATA HDD
  • Key lock to secure hard drive
  • Aluminum alloy chassis
  • High flow Air vents
LEDs
  • Power Status LED
  • RAID Status LED
  • Host Status LED
  • Device Status LEDs (Error, Link&Activity)
Rear Panel
I/O Interface
  • eSATA Connector
  • USB 2.0 B type Connector
  • FireWire Connector
  • Bilinugal Connector
RAID Features
  • Fully hardware-accelerated RAID Engine
  • No driver, BIOS or software required for RAID operation
  • No external DRAM or processor required for RAID operation
  • Independent of device SATA port connection sequence
  • Supports RAID levels: 0 / 1 / 3 / 5 / 10 / JBOD / CLONE
  • RAID 3 / 5 write-back cache to enhance performance
  • SATA In-band application interface
  • Supports more than 2TB RAID drive
  • Supports on-line read data integrity check
  • Supports on-line command based bad sector recovery
  • Supports on-line Auto-Rebuild
  • Rebuild speed: 200GB/hour
  • Rebuild proceeds continuously between power cycling
  • Supports Hot Spare on RAID
  • Supports various RAID configurations and monitoring methods
    • Rotary Switch and Status LEDs
    • RAID Manager GUI Utility
Cooling fan 40mm X 40mm cooling fan on the rear panel
Power
  • Power Supply: 220W
  • Input: AC 115-230V, 50-60Hz
  • Output: 12V/16A & 5V/13A (Max.)
Environmental Condition
Operating Temperature: 10℃-40℃ (50℉-104℉)
Relative Humidity: 10%-85% Non-condensing
Physical Dimensions
Form Factor 1U 19-inch rack mount chassis
Dimensions 443(W) x 43.5(H) x 404(D)mm
Weight 6.0kg (without HDD)
Kit includes
  • 1U35Q-UFSQS201 eSATA, USB 2.0 & FireWire 800 to Quad SATA II Storage Enclosure
  • CB-00307---eSATA 7pin to eSATA 7pin Cable in length of 1.5m
  • CB-00136---USB 2.0 A to B Type Cable in length of 1.5m
  • CB-00362----Beta 9pin -to- Beta 9pin Cable in length of 2m
  • CB-00055 --- FireWire plug to FireWire plug with Ferrite Core Cable in length of 1.5m
  • Sixteen SC-00040---Screws for four HDDs
  • Key for Mobile Tray
  • Installation Guide
  • CD-00036 --- CD-title (HW RAID Manager GUI AP)
  • AC power cord 6 feet length (option)
    • North America Plug (NEMA 5-15) --- CB-00260-02
    • Europe Plug (CEE 7-VII Schuko) --- CB-00264
    • British Standard Plug (BS 1363) --- CB-00103
    • Australia Plug (AS3112) --- CB-00272