• USB 3.1 Gen 2 1-port Hub
• Designed with VL820 (USB 3.1 Gen 2 Compliant Hub, TID# 5030000002)
• Supports USB 3.1 SuperSpeed Plus (10Gbps), SuperSpeed (5Gbps), USB 2.0 Hi-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps)
• USB 3.1 cable ports
  • USB 3.1 cable port ( Type-C Receptacle), TID# 5,200,000,033
  • Provides USB 3.1 cable port lock mechanism
• No Special Driver Requirements; Works Seamlessly With Any Operating System With USB Stack Support

U31H103 is a high-performance 1-port Universal Serial Bus (USB) 3.1 Gen 2 compliant Hub, extending your USB 3.1 signals an additional length (Gen1: 3~6m, Gen 2: 2~4m).

One upstream port and one downstream ports support not just SuperSpeed Plus transfer, but are also backwards compatible with previous USB specifications and offer support for SuperSpeed(5Gbps), Hi-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps) traffic.

U31H103 allows for a maximum data transfer rate of up to 10Gbps, or twenty times the throughput available to USB 2.0 based devices. Other enhancements provide for improved interaction between device and host controller, including important advancements in power management.

• USB 3.1 Compliant Hub
  • Compliant to Universal Serial Bus 3.1 Specification
    • SuperSpeed Plus USB (USB 3.1 Gen 2)
  • Compliant to Universal Serial Bus 2.0 Specification
  • Supports Simultaneous Operation of Any Combination of Super-speed Plus (SSP), Super-speed (SS), high-speed (HS) and full-speed (FS) and Low-Speed (LS) Device.
  • Supports USB Power Saving Features such as Link Power Management, Ux States, Selective Suspend, and Function Suspend
  • In-house USB PHY enploys advanced COMS process for low power consumption
• USB Bus Power ( It is depends on USB Host Card)
• Provides USB 3.1 cable port lock mechanism
  • USB 3.1 cable port ( Type-C Receptacle), TID# 5,200,000,033

    
    

Note: The greater the number of hubs or the length of a cable, the higher the electricity consumption.
This results in a decrease in electricity supplied to the terminal device.

• 26(W) x 21(H) x70(D)mm
• NW.:g

• USB 3.1 Gen 2 (10Gbps) Active Cable
  • U31AC2-A2C2---USB 3.1 Gen 2 (10Gbps) Legacy Std-A plug to Type-C plug Active (Re-timer) Cable with two Jackscrews (M2) on both Ends
  • U31AC2-C2MB2---USB 3.1 Gen 2 (10Gbps) Legacy Type-C plug to Micro-B plug Active (Re-timer) Cable with two Jackscrews (M2) on both Ends