Highlights
  • 3.5 inch HDD Form Factor
  • Four M.2 (Socket 3 Key M PCIe-based SSD Module Pinout)
    • Supports the following type M.2PCIe SSD :
      • Type 2242: 42mm(L) x 22mm(W)
      • Type 2260: 60mm(L) x 22mm(W)
      • Type 2280: 80mm(L) x 22mm(W)
      • Type 22110: 110mm(L) x 22mm(W)
  • Provides the PCI Express expansion solution for M.2 PCIe SSD with M Key (including B+M Key)
Introduction

DB35-NVMEM2X42 is a SFF-8643 to M.2 (PCIe x4) 4-in-1 Docking Board, The DB35-NVMEM2X42 provides Four M.2 (Socket 3 Key M PCIe-based SSD Module Pinout) in connection to the PCIe switch host card (QIP4X-PCIE8XG301).

Technical Specifications

DB35-NVMEM2X42

Upstream Host Connector
  • Two SFF-8639 Connectors
    • 85ohm, 68pin
    • 4-Lane PCIe

Downstream Internal PCIe Bus Interface

  • Two M.2 (Socket 3 Key M PCIe-based SSD Module Pinout)
  • Supports M.2 PCIe SSD Module
    • M.2 PCIe-based SSD with M Key (including B+M Key)
    • Module card Types:
      • Type 2242: 42mm(L) x 22mm(W)
      • Type 2260: 60mm(L) x 22mm(W)
      • Type 2280: 80mm(L) x 22mm(W)
      • Type 22110: 110mm(L) x 22mm(W)
LEDs
  • DAS (Drive activity Signal) LED

Power

  • it requires +12V power only  (Through SFF-8639 from SATA 15pin Power Connector)
Dimensions
  • 3.5 inch HDD Form Factor
Related Products
  • QIP4X-PCIE8XG301
    • Internal Quad PCIe x4 (four SFF-8643 Connectors) to PCIe x8 Gen 3 Switch Host Card
  • QIP4X-PCIE16XB01
    • PCI Express x16 Bifurcation Riser Card
  • CB-S0027
    • U.2 Plug (SFF-8639 68P) w/SATA power to Mini SAS HD 4i Plug (SFF-8643 36P) Cable, L=65cm