Introduction

FW-142AIH (with Female IDC 2x20 Connector)
Horizontal Internal Type IDE(ATA/ATAPI) to FireWire (IEEE 1394a) Bridge Board

Technical Specifications

IDE(ATA/ATAPI) to FireWire (IEEE 1394a) Bridge Board:

  • FW-142AiH was designed with OXFW-911 chip which support UDMA33/66/100 ATA mode.
  • FW-142AiH supports both ATA and ATAPI devices by using the same firmware.
Physical Dimensions
  • 2.85" x 1.45" (7.25cm x 3.80cm)
Hardware Requirements
  • Desktop PC: with either a built-in FireWire (IEEE 1394) controller or a FireWire (IEEE 1394) to PCI Host Adapter equipped with a external FireWire (IEEE 1394) port.
  • Laptop PC: with either a built-in FireWire (IEEE-1394) controller or a FireWire (IEEE 1394) to CardBus PC Card equipped with a external FireWire (IEEE 1394) port.
Operating System Requirements
  • Windows 98SE or higher; MacOS 9.1 or higher; Linux
  • Driver Requirements
    • FireWire:
      • No driver installation for Windows 98SE, ME, 2000, XP, 2003, Vista, 7, Mac OS and Linux
Applications
  • To turn your ATA/ATAPI Device to FireWire Device.
  • This allows peripheral vendors a unique opportunity to continue to take advantage of the ATA/ATAPI economies of scale while presenting peripherals into the rapidly expanding 1394/FireWire markets.