Introduction

FWB1GMTRJ-PCI01 is designed to meet the demanding requirements of todays 1394 bus architecture. Its capability of performing 800M bits/s transfer speed enables the throughput and bandwidth to move data efficiently and quickly between the PCI and 1394&GOF buses. FWB1GMTRJ-PCI01 also provides outstanding ultra-low power operation and intelligent power management capabilities.

FWB1GMTRJ-PCI01 's improved throughput and increased bandwidth make it ideal for todays high-end PCs. It opens the door for the development of S800 RAID- and SAN-based peripherals. The data transfer rates of FWB1GMTRJ-PCI01 are 100Mbits/s, 200Mbit/s, 400Mbits/s, & 800Mbits/s.

Technical Specifications
Host Bus:

PCI 2.x Compliant

  • Universal PCI interfaces compatible with 3.3-V and 5-V PCI signaling environments.
  • 33-MHz/64-bit and 33-MHz/32-bit selectable PCI interface.
IEEE 1394 Std Support:
  • Fully Supports Provisions of IEEE P1394b Revision 1.33+ at 1-Gigabit Signaling Rates
  • Fully Supports Provisions of IEEE 1394a.2000 and 1394.1995 Standard for High Performance Serial Bus
  • Fully Interoperable With Firewire., i.LINK., and SB1394., Implementation of IEEE Std 1394
1394 Bus Transfer Rate:
  • Provides three IEEE Std 1394b-2002 fully compliant cable ports at 100/200/400/800 megabits per second (Mbits/s).
IEEE-1394 to PCI Controller :
  • Texas Instruments TSB82AA2
  • PCI burst transfers and deep FIFOs to tolerate large host latency
    • Transmit FIFO—5K asynchronous
    • Transmit FIFO—2K isochronous
    • Receive FIFO—2K asynchronous
    • Receive FIFO—2K isochronous
IEEE 1394b Transceiver/Arbiter:

Texas Instruments TSB81BA3

Fiber Optical Port:
  • With one Agilent HFBR-5912E (MT-RJ) Small Form Factor Fiber Optic Transceiver.
  • Compliant with Specifications for IEEE 802.3z/ Gigabit Ethernet
  • 850nm VCSEL(Vertical Cavity Surface Emitting Laser)
  • Maximum link lengths:
    • 220 m Links in 62.5/125 μm MMF 160 MHz*km Cables
    • 275 m Links in 62.5/125 μm MMF 200 MHz*km Cables
    • 500 m Links in 50/125 μm MMF 400 MHz*km Cables
    • 550 m Links in 50/125 μm MMF 500 MHz*km Cables
  • IEC 60825-1 Class 1/CDRH
    VClass 1 Laser Eye Safe
Number of Ports:

External:

  • Two Bilingual 9pin with Jackscrew holes

    Provides Two Fully Backward Compatible, (1394a.2000 Fully Compliant) Bilingual P1394b Cable Ports at up to 800 Megabits per Second (Mbits/s)

  • One GOF(MT-RJ) Port
Power Management:

D0, D1, D2, and D3 power states and PME events per the PCI Bus Power Management Interface Specification

Bus Power Connector:

with IDE big-4pin DC +12V power connector

Certifications
  • CE Test: Pass
  • FCC Test : Pass