ED01-2C-P1 External PCIe x16 Gen 5 Expansion Enclosure

Highlights

Supports five PCI Cutouts
Dimension: 12.3 x 35.9 x 23(H)cm
Two PCIe x16 Gen 5 Slots
- Metal-Reinforced SMT Type
- The distance between two Slots is 40.64mm
It accommodates up to a 3-slot/triple-width PCIe cable adapter or DPU (Super NIC)
Built-in Flex-ATX Form Factor Power Supply: 600W

Introduction

ED01-2E-P1 is PCIe Bifurcation Fan-out (x16 to x16) Enclosure.
The PCIe x16 2-slot Docking Board (PCIEX16D02-3) provides two PCIe x16 Slots (one for Target Cable Adapter/DPU and one for Add-in Card/SSD). ED01-2E-P1 expands PCI Express connectivity from your desktop computer, enabling seamless, high performance, and reliable control of PCIe x4, x8, x16 Add-in Card.
No additional software or drivers are needed – the remote devices operate as if they were directly installed in your computer. Designed to overcome the limited PCIe connectivity of most desktop computers, the ED01-2E-P1 can be quickly and easily.

Technical Specifications

Backplane	Two PCIe x16 Gen 5 Slots Metal-Reinforced SMT Type The distance between two Slots is 40.64mm Slot1 support 3-Slot/Triple-width PCIe Card Slot2 support 2-Slot/Dual width PCIe Card The REFCLK of Slot1 & Slot2 The REFCLK of Slot2 could be from either Slot1 or on-board Clock Generator CFC (100MHz) The REFCLK of Slot1 could be output to Slot2 or input from on-board Clock Generator CFC (100MHz)
Indicator LEDs	Power LED (Green) in front panel
Power	Power Switch (ON/OFF) in front panel
Cooling Fan	8cm x 8cm in front panel
Power Supply	Flex-ATX Form Factor (LxWxH=150mm81.5mm40.5mm) P1: 600W Input: AC 100-240V, 50-60Hz Output: +5V/15A, +3.3V/15A ( The maximum combined load on +3.3V and +5V outputs shall not exceed 80W.) +12V/50A (The +12V maximum load shall not exceed 600W) Power Plug: PCIe Graphics Card 8pin x 2 pcs PCIe Graphics Card 8(6+2)pin x 2 pcs
Form Factor	12.3 x 35.9 x 23(H) cm
NW	4KG (Unit Package:6KG)

Applications

The REFCLK of Slot2 is from Slot1 PCIe Target Cable Adapter
- Slot1 for Target Cable Adapter
- Slot2 for PCIe Add-in Card

The REFCLK of all PCIe Slots are from on-board Clock Generator
- Scenario 1:
  - Slot1 for DPU or Target Cable Adapter
  - Slot2 for PCIe Add-in Card
- Scenario 2:
  - Slot1 for PCIe Add-in Card
  - Slot2 for DPU or Target Cable Adapter

Available Models

ED01-2E-P1HC: PCIe Gen 4 Bifurcation Fan-out (x16 to x16) Enclosure with EP16XG4RDCA03 (Target Mode)

ED01-2E-P1HD: PCIe Gen 4 Bifurcation Fan-out (x16 to x16) Enclosure with EP16XG4RDCA04T (Target Mode)

Kit includes

ED01-2E-P1 y

y: AC power cord 6 feet length

U: North America Plug (NEMA 5-15) --- CB-00260-02
E: Europe Plug (CEE 7-VII Schuko) --- CB-00264
K: British Standard Plug (BS 1363) --- CB-00103
A: Australia Plug (AS3112) --- CB-00272

example:

ED01-2E- P1U
- U: North America Plug (NEMA 5-15) --- CB-00260-02

ED01-2E-P1xxx y

xxx: Target & Host Cable Adapter

HC0: EP16XG4RDCA03(Target Mode) -- Suport PCIe AOC
HC1:EP16XG4RDCA03(Target Mode) + EP16X-PCIE16XG421A(Host Mode) -- Suport PCIe AOC
HD0: EP16XG4RDCA04T(Target Mode)
HD1: EP16XG4RDCA04T(Target Mode) + EP16XG4RDCA04H(Host Mode)

y: AC power cord 6 feet length

U: North America Plug (NEMA 5-15) --- CB-00260-02
E: Europe Plug (CEE 7-VII Schuko) --- CB-00264
K: British Standard Plug (BS 1363) --- CB-00103
A: Australia Plug (AS3112) --- CB-00272

example:

ED01-2E- P1HD0U
- HD0: EP16XG4RDCA04T(Target Mode)
- U: North America Plug (NEMA 5-15) --- CB-00260-02