Highlights
  • One PCIe x16 Target Slot (J2) for Target Cable Adapter
  • One PCIe x16 Expansion Slot (J1) for PCIe Add-in Card
    • The REFCLK is CFC (100MHz) from on-board Clock Generator
    • The PERST# (PCIe Reset) is from either Target Cable Adapter or on-board Reset Circuit
Introduction

PCIEX16D02 is PCIe x16 Expansion Docking Board.

Requires an target adapter card in the host interface card slot. The PCIe x16 2-slot Docking Board supports up to a PCIe x1/ x4/ x8/ x16 add-in Card.
Technical Specifications
  • Upstream: PCIe x16 target slot
    • For Target cable adapter (EPCIE8XRDCA03, EP8X-PCIE8XG302-T)
  • Downstream: PCIe x16 expansion slot
    • Support PCIe x1/ PCIe x4/ PCIe x8/ PCIex16 Add-on Card
  • Power Connector: ATX 24-Pin Power Connector
  • Fan Power Conector (12V Output): JST compatible wafer 2pin (pitch=2.0mm) connector
  • Power Switch: JST compatible wafer 2pin (pitch=2.5mm) connector
    • For auto-switch you may use a cable to join both PCIEX16D02 and Target cable adapter (EPCIE8XRDCA03, EP8X-PCIE8XG302-T) Power Switch.
  • Pin Header: Power switch / Power LED
  • CFC Spread Setting (JP1)
    1-3 2-4 CFC Spread Setting
    Short Open -0.5% (99.75MHz)
    Short Short -0.25% (99.875MHz)
    *Open Short Off (100MHz)
  • Dimensions
    • 55.52(W) x 164.53(L) mm
    • It suits for ATX & MicroATX Form Factor Mounting

Application
Related Products
  • EPCIE8XRDCA03---External PCI Express (SFF-8644 1x2) to PCIe x8 Gen 3 Active (Redriver with Linear Equalization) Cable Adapter Card
  • EP8X-PCIE8XG302-T---External PCI Express (SFF-8644 1x2) to PCIe x8 Gen 3 Switch Host Card (for Target)
  • EPCIE16XRDCA02---External PCI Express (Two SFF-8644 1x2) to PCIe x16 Gen 3 Active (Redriver with Linear Equalization) Cable Adapter Card
  • CB-00711---JST Wafer 2pin Cable; Pitch=2.5mm, 26AWG, , L=30cm