Welcome to IOI Website
Products Search Category Keyword
Home About IOI Products Support Registration Contact us Where to buy
New Products
 

More..

  
Product Category
   

NEW Products

Bridge Board

 
FWBU2DSATA11

FWBU2DSATA11 is dual Mode (Device Mode or Host Mode) Bridge Board featuring Oxford OXUF934DSB
 
2008/05
 
 
U2-SATA11

U2-SATA11 is an USB 2.0 to SATA bridge board. It has an USB high-speed device port and a SATA 1.5G host port. It received standard MassStorage Device Class (MSDC) SCSI command from USB host and translate into ATA/ATAPI command to SATA device. The maximum throughput can goes up to 30MB/sec.
 
2008/02
 
 
U2FW-IDE22
  • IEEE 1394 (FireWire + iLink) and USB 2.0 Combo Host Interface
  • Supports one IDE (ATA/ATAPI) device.
  • Provides a switch which allow user to set the function for Read-only (Write Protect) or Read/Write.
2008/02
 
 
ESU2DSATA10

ESU2DSATA10 is USB 2.0 & eSATA to dual SATA RAID Bridge Board

ESU2DSATA10 is a selectable hardware RAID Bridge Board with two SATA ports. A true hardware solution, ESU2DSATA10 requires no software to be installed on your machine.

 
2007/07
 
 
UF2PSATA01
UF2PSATA01 is a USB 2.0 & FireWire (IEEE 1394a) to ATA or SATA bridge.

UF2PSATA01 is ideally suited for tailgate interface applications for removable-media drives CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-RAM, tape drive, and hard disk drive. It allows ATA or SATA storage devices to be connected to USB 2.0 & FireWire (IEEE 1394a) serial bus in a plug-and-play fashion.

UF2PSATA01 provides a switch which allow user to set the function for Read-only (Write Protect) or Read/Write.

 
2007/12
 

Host Adapter

 
FWB-PCI3204
  • 32-bit PCI Host interface
  • Two Internal Bilingual (1394b) Ports
  • One External Bilingual (1394b) connector (with screw lock)
  • Big IDE 4-pin DC Power Connector
  • Low Profile PCI Form Factor
 
2008/05
 
 
FWB-PCI3203
  • 32-bit PCI Host interface
  • One Internal Bilingual (1394b) Port
  • Two External Bilingual (1394b) connectors (with screw lock)
  • Big IDE 4-pin DC Power Connector
  • Low Profile PCI Form Factor
 
2008/05
 
 
FWB-PCI3202A
  • 32-bit PCI Host interface
  • Two Bilingual (1394b) + One FireWire (1394a) Ports
  • Bilingual (1394b) connector is with screw lock
 
2008/03
 
 
FWB-PCIE1X21A
  • Host Bus: 1-lane 2.5 Gb/s PCI Express
  • Eight (8) isochronous transmit/receive contexts
  • Deep 8 Kbyte isochronous transmit/receive FIFO’s
  • Complies with 1394 OHCI draft 1.2
  • Three external 1394 ports
  • Bilingual ports with Screw Holes for Jackscrew Type Plug Cable

 

 
2007/11
 
 
SATA2-PCIE1X21
  • Host Bus: 1-lane 2.5 Gb/s PCI Express
  • Number of Ports: One eSATA and One Internal SATA ports
  • Boot ROM: Non
  • Low Profile PCI Form Factor: Yes

 

 
2007/07
 
 
FWB-PCIE11

The FWB-PCIE11 is a 2-port OHCI 1.1 Compliant FireWire800 (IEEE 1394b) to PCI Express Host Adapter.

FWB-PCIE11 is designed with three key components

  • PCI Express to PCI Bus Translation bridge.
  • Texas Instruments TSB82AA2 --- IEEE 1394b OHCI-Lynx Controller.
  • Texas Instruments TSB81BA3D --- IEEE 1394b 3-port Cable Transceiver/Arbiter.
 
2007/01
 
 
FWB-PCIE10A

The FWB-PCIE10A is a 3-port OHCI 1.1 Compliant FireWire800 (IEEE 1394b) to PCI Express Host Adapter.

FWB-PCIE10A is designed with three key components

  • PCI Express to PCI Bus Translation bridge.
  • Texas Instruments TSB82AA2 --- IEEE 1394b OHCI-Lynx Controller.
  • Texas Instruments TSB81BA3 --- IEEE 1394b 3-port Cable Transceiver/Arbiter.
 
2007/01
 

Enclosure

 
NUFS5030-1
  • Support up to 5 SATA or SATA II drives.
  • Support RAID level 0, 1, (0+1), 3, 5, 6 and JBOD.
  • The new polynomial RAID 6 Engine to support highest speed RAID 6.
  • Online RAID level/stripe size migration
  • Online Capacity Expansion.
  • Online Dynamic Volume Set Capacity expansion.
  • Greater than 2TB per volume set
  • Dual Host (DAS & NDAS) Connectivity and Support up to three Volume set.
    • USB 2.0/ FireWire 800 (1394b)/ eSATA host supports one Volume set
    • Gigabit Ethernet host supports up to two Volume set
 
2008/06
 
 
U2ATAE525MR1

U2ATAE525MR1 is an USB 2.0 to ATA Encryption 5.25" bay enclosure with Mobile Rack.

The U2ATAE525MR1 with 128-bit, hardware-encrypted security for use with ATA/SATA Hard Disk Drives using a USB 2.0 interface. The hardware encryption/decryption function, which is fully compliant with the Advanced Encryption Standard(AES), combines with two-level software authentication of passwords to prevent unauthorized access of memory content.

 
2008/05
 
 
U2ATA252MR02
U2ATA525MR02 is an USB 2.0 to ATA 5.25" bay enclosure with Mobile Rack.

U2ATA525MR02 is ideally suited for tailgate interface applications for 3.5" ATA/ Serial ATA hard disk drive.

It allows ATA/Serial ATA HDD to be connected to USB 2.0 serial bus in a plug-and-play fashion.

U2ATA525MR02 allows users to easily hot-swap ATA/Serial ATA HDD without interrupting the current operation.

U2ATA525MR02 provides the perfect solution for data backup and transferring of data between computers using 3.5" ATA/Serial ATA HDDs.

 
2008/01
 
 
NAS-DMSAQS01
  • Cost-effective: Provides high-reliability of storage server for SMB/SOHO/home users by low acquisition cost.
  • Home media server: Supports UPnP and DLNA protocols to store AV content to be served to AV rendering devices.
  • Cost-effective Simple to manage Networked Storage: Networks easily and fast via the Gigabit Ethernet, and supports all the major file serving protocols including CIFS/SMB, NFS, HTTP and FTP.
  • Greater Performance and Availability: Configures your system by HW RAID 0,1,4,5 and JBOD in four different modes to provide up to 4 TB of storage capacity by using 1 TB HDD.
  • Remote managements: Supports web user interface and command console for configuration, setting and management.
  • No IP setting required: Supports DHCP, no IP setting required.
  • Reliability: Prevents users’ data from loss if one HDD is failure by RAID configuration.
 
2007/08
 
 
MIRROR DRIVE II
  • Host Interface: eSATA and USB 2.0
  • Device : Two 3.5" SATA HDDs
  • SATA HDD Mobile Tray Design
  • Supports RAID 1 (Mirroring)
 
2007/07
 

HUBs, Port Multipliers, Repeaters

 
SPMH4726
  • 1-to-5 SATA Port Multiplier
  • OS independent
  • RAID 0, 1, 10 support
  • High performance, reliability and simplicity with hardware RAID 0, 1, and 10 options
  • Virtualize multiple storage devices into one or many storage units, e.g. multi-drive partitioning
  • Device-to-devices copy to off-load host during rebuild
  • Supports ATAPI devices in non-RAID/virtualization mode
  • RAID and Virtualization dets configurable with graphical user interface
 
2008/04
 
 
1394R-B4

1394R-B4 is a?four ports IEEE1394b repeater, extending your signal an additional 4.5 meters. It's easy to setup and there is no configuration necessary, like all IEEE1394 compliant hardware.

 
2008/03
 
 
SPMH3726

SPMH3726 is 1-to-5 SATA Port Multiplier designed to provide a high performance link between a single SATA host port and 5 SATA device ports. With its unique data aggregation capability and 3Gbps serial link capability, the SPMH3726 is able to take full advantage of 3Gbps host link bandwidth and FIS-based switching host controllers by bundling together data from device ports and sending it over the 3Gbps host link. Additionally, the feature-rich SPMH3726 supports all the port multiplier related SATA II extensions allowing system designers to exploit the full potential of SATA in their storage solutions.

 
2007/12
 
 
U2H402F

The U2H402F works backward compatible either when any one of downstream ports are connected to an USB 1.1 compliant device, or when the upstream port is connected to a USB 1.1 compliant host.

 
2007/4
 
 
FWB2GOF01

FWB2GOF01 is a FireWire 800 to GOF repeater featuring Texas Instrument's TSB81BA3D and Agilent Fiber Optical Transceiver.

Two models are available:

  • FWB2GOF01-LC is with one Agilent HFBR-5911L (DUPLEX LC) Small Form Factor Fiber Optical Transceiver.
  • FWB2GOF01-MTRJ is with one Agilent HFBR-5912E (MT-RJ) Small Form Factor Fiber Optical Transceiver.
 
2007/4
 
 
SATAPMH141-S

SATAPMH141 is 1-to-4 SATA Port Multiplier that allows a single SATA host port to communicate with up to 4 SATA device ports and one SEMB port. With its unique data aggregation capability and 3Gbps serial link capability, the SATAPMH141 is able to take full advantage of 3Gbps host link bandwidth and FIS-based switching host controllers by bundling together data from device ports and sending it over the 3Gbps host link. Additionally, the feature-rich SATAPMH141 supports all the port multiplier related SATA II extensions allowing system designers to exploit the full potential of SATA in their storage solutions.

 
2007/03
 

Front Connect

 
DB-35ESDC1205
eSATA Front Connect is a extension cable (with metal frame) which will connect Internal SATA Port to the Front panel of the Computer.

eSATA Front Connect will allow user to plug and play SATA device from the front panel of the computer.

The eSATA Front Connect is designed to fit the dimension of 3.5" Floppy Disk Drive bay of the computer case.

 
2008/04
 

 

 
© 2005 IOI Technology Corporation. All Rights Reserved.