Highlights
  • Supports five Low Profile PCI Cutouts
  • Supports PCIEX16D02-2, PCIEX16D03-4A, PCIEX16D04-448, PCIEX16D05-5S Backplane
  • Built-in Flex-ATX Form Factor Power Supply
  • Dimension: 2U half-width
    • 22.2 x 30 x 8.76(H) cm
    • Supports Low Profile Add-in Card
Introduction

EDL1-00-P is an 2U half-width PCIe Expansion Enclosure for PCIe Backplanes (PCIEX16D11, PCIEX16D02-2, PCIEX16D03-4A, PCIEX16D04-448, PCIEX16D05-5S).

EDL1-00-P expands PCI Express connectivity from your desktop computer, enabling seamless, high performance, and reliable control of PCIe x4, x8, x16 Add-in Card.

No additional software or drivers are needed – the remote devices operate as if they were directly installed in your computer. Designed to overcome the limited PCIe connectivity of most desktop computers, the EDL1-00-P can be quickly and easily.

Technical Specifications
Model No. EDL1
Rack Units
  • 2U half-width
LED (Front)
  • Power LED (Red)
Expansion Slot
  • five Low Profile PCI Cutouts
Cooling Units
  • Two 4cm x 4cm in back panel
Power Supply

  • Flex-ATX Form Factor LxWxH=150mm*81.5mm*40.5mm
    P1: 600W

    • Input: AC 100-240V, 50-60Hz
    • Output:
      • +5V/15A, +3.3V/15A ( The maximum combined load on +3.3V and +5V outputs shall not exceed 80W.)
        +12V/50A (The +12V maximum load shall not exceed 600W)
    • Power Plug:
      • PCIe Graphics Card 8pin x 2 pcs
      • PCIe Graphics Card 8(6+2)pin x 2 pcs

P2: 300W

    • Input: AC 115-230V, 50-60Hz
    • Output:
      • +5V/12A, +3.3V/22A (+5V&+3.3V Combined Load Maximum 110W)
        +12V/22A (+12V1&+12V2 Combined Load Maximum 250W)
    • Power Plug:
      • ATA 4pin x 5 pcs
      • PCI Express Graphics Card 6pin x 2 pcs
Dimensions
  • 2U half-width
  • 22.2 x 30 x 8.76(H) cm
  • NW: 3KG (EDL1-00-P1)
Related Products

  • PCIEX16D03-4A PCIe x16 to two PCIe x16 (x8 mode) Slots Expansion Docking Board
    please be noted that your mainboard or Host Switch Card needs to have PCIe bifurcation mode support (x8, x8).

  • PCIEX16D04-448 PCIe x16 to two PCIe x16 (x8 mode) Slots Expansion Docking Board
    please be noted that your Host Switch Card needs to have PCIe bifurcation mode support (x4, x4, x8).

  • PCIEX16D05-5S PCIe x16 to four PCIe x16 (x4 mode) Slots Expansion Docking Board
    please be noted that your mainboard or Host Switch Card needs to have PCIe bifurcation mode support (x4, x4, x4, x4).

 
Kit includes

EDL1-xx-P1 yyy z

  • x: Backplane
    • 2B: PCIEX16D11
    • 2C: PCIEX16D02-2
    • 3C: PCIEX16D03-4A
    • 4A: PCIEX16D04-448
    • 5C: PCIEX16D05-5S
  • Power Supply
    • P1--- 600W
    • P2---300W
  • y: Target Cable Adapter
    • HC0: EP16XRDCA03PL
    • HD0: EP16XG4RDCA04TPL
    • HD1: EP16XG4RDCA04TPL+EP16XG4RDCA04H (Please be noted that your mainboard needs to have PCIe bifurcation mode support.)
  • z: AC power cord 6 feet length
    • U: North America Plug (NEMA 5-15) --- CB-00260-02
    • E: Europe Plug (CEE 7-VII Schuko) --- CB-00264
    • K: British Standard Plug (BS 1363) --- CB-00103
    • A: Australia Plug (AS3112) --- CB-00272